TYRE LEVERS

800mm Tyre Levers Forged One End (Truck Type)

The tyre levers are 19mm in diameter; are manufactured from high-grade BHP steel, are hot forged and heat-treated. The levers are forged on one end only as the other end, being 19mm in diameter, fits truck and four wheel drive wheel braces and truck load binders. This gives the lever the dual purpose of being able to be used as a universal bar. The lever is extremely strong and will not bend under normal use. The levers are zinc plated and then finished with a zinc blue.
PRODUCT CODE. LEV110

800mm Tyre Levers Forged Both Ends.

The levers are 19mm in diameter and utilize the same manufacturing processes outlined above The levers are forged both ends to allow removal and refitting of tyres. The spoon end of the lever is designed to remove the tyre whilst the hooked end is specifically designed to re-fit the tyre to the rim. The design of the re-fitting end prevents the tyre from creeping up the lever which can hinder the tyre going back over the rim. This is a real advantage when re-fitting the tyre, and makes the whole job much easier.
PRODUCT CODE. LEV105

800mm Jamac Tyre Levers for Three Piece Split Rimmed Wheels

The levers are 19mm in diameter and are forged both endsto allow removal and refitting of three piece split rimmed wheels. The specially designed spoon end, developed in conjunction with the Australian Defence Force, enables the user to apply pressure to the lower ring thus gaining access to the top Spit ring Groove.
Nato Stock Number 5120 66145 6201
PRODUCT CODE. LEV120