600mm Tyre Levers (Car & 4WD Type) LEV100

The tyre levers are 19mm in diameter; are manufactured from high grade BHP steel, are hot forged and heat treated. The levers are forged on one end only as the other end, being 19mm in diameter, fits truck and four wheel drive wheel braces and truck load binders. This gives the lever the dual purpose of being able to be used as a universal bar. The lever is extremely strong and will not bend under normal use. The levers are zinc plated and then finished with a zinc blue. PRODUCT CODE. LEV100

600mm Tyre Levers Forged Both Ends. LEV102

The levers are 19mm in diameter and utilize the same manufacturing processes outlined above The levers are forged both ends to allow removal and refitting of tyres. The spoon end of the lever is designed to remove the tyre whilst the hooked end is specifically designed to re-fit the tyre to the rim. The design of the re-fitting end prevents the tyre from creeping up the lever which can hinder the tyre going back over the rim. This is a real advantage when re-fitting the tyre, and makes the whole job much easier.

The lever is suitable for all tube and tubeless, 4WD and car wheels including alloy rims. As the lever has broad ends, there is minimal damage to an alloy rim when removing and refitting the tyre using this lever. The lever is manufactured from a special high-grade BHP steel and is hot forged, heat treated and electroplated which gives the tool extra strength and durability. PRODUCT CODE. LEV102.