EMERGENCY TUBELESS TYRE REPAIRS

Equipment required

Tubeless repair kit and a ground sheet.

Procedure

• Dismount the tyre and locate the injury and inspect for extent of the injury.
  
• Remove the foreign matter. Taking care as the object may be sharp.
  
• Mark the area with chalk.
  
• Squeeze a small amount of cement onto the injury (to lubricate). Clean and rasp the hole with the probe/rasp tool. Repeat this procedure several times until the hole is clean.
  
• Select the appropriate size string for the injury.
  
• Centre the string in the middle of the eye of the insertion tool.
  
• Firmly push the insertion tool through the cleaned hole. Continue until 20mm of the string remains outside the tyre.
  
• Slowly rotate the insertion tool '14 of a turn.
  
• Slowly pull insertion tool out of the hole.
  
• Cut off any excess string as close as possible to the tyre.
  
• To complete this repair, apply a patch to the inner wall of the tyre.
  

THIS IS A TEMPORARY REPAIR METHOD AND SHOULD ONLY BE USED IN EMERGENCY SITUATIONS WHEN OFF ROADING OR OUT IN THE FIELD.

CONTENTS PAGE

Page 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, NEXT